E-CIM 100 has been developed to collect statistical data and detect incidents of the vehicles passing over its sensors. The basic functions of this device are recognizing the movement direction, measuring the length and speed, and counting of the vehicles passing along the lanes, where sensors are installed.
For up to a total of 8 lanes each equipped with two inductive loop sensors, E-CIM 100 system can provide the desired functions and performance as a single device.
E-CIM 150, classification system has been developed to collect statistical data of classified vehicles travelling along a highway. The system is equipped with a loop sensor and a piezo sensor for up to a total 8 lanes. In addition to counting and statistical functions, the device can also communicate with the parent system to provide detailed information at the instant an incident occurs. It is possible to transmit data up to a distance of 1km via isolated RS-422 interface and up to distance to 15m via RS-232 interface.
Mounted on a 19” 3U rack, E-CIM 150 can easily be replaced fully or as a module for maintenance. Service and replacement is simple thanks to the fact that all connections are socket-type and located on the front side of the device.
E-CIM102 2 Lanes (4 Loops)
E-CIM-103 3 Lanes (6 Loops)
E-CIM-104 4 Lanes (8 Loops)
E-CIM-106 6 Lanes (12 Loops)
E-CIM-108 8 Lanes (16 Loops)
E-CIM152 (2 Loops, 2 piezos)
E-CIM-153 (3 Loops, 3 piezos)
E-CIM-154 (4 Loops, 4 piezos)
E-CIM-156 (6 Loops, 6 piezos)
E-CIM-158 (8 Loops, 8 piezos)
You can lug the list right and left <>
|Vehicle Speed||0-160 km ±%5|
|Vehicle Length||1-25m ±0.5m|
|Communication||RS-422, isolated remote port / RS-232 local port|
|Supply Voltage||Nominal : 220 VAC 30W Max Range: 84 VAC - 264VAC|
|Electronics operating temperature range||-25°C to +50°C|
|Sensors operating temperature range||-40°C to +70°C|
|Mounting||19 Rack 3U|
|Classification||With using one loop and one piezo lane sensor|
|Classification Classes||Up to 20 classes|