PRODUCTS LOAD CELLS CUSTOM LOAD CELL PFT-S LOAD CELL



PFT-S Load Cell
0.5-1-2 kN

load cells and mounting kits, custom loadcells ,pft-s

Explanation;
PFT-S is a roller type load cell developed for special application where roller systems used. It is affixed to the roller's axle in winding systems and senses the load exerted upon the shaft.

PFT-S enduring against to corrosion with its stainless steel construction, also PFT-S is protected to IP68 standards meaning that they are fully protected against dust and water. It can be easily install with a ball bearing which affixed to inside the load cell. Thereby, we can learn and set the tension of the material which surrounds the roller.

Features;

  • Resistant to side forces
  • IP55 industrial protection



You can lug the list right and left <>

Specifications;

Maximum capacities (Emax)  N  500-1000-2000
Maximum number of verification intervals (nLC)     1000
Minimum verification internal (Vmin)    
Combined error  %   ≤ ±0.5
Creep error over 30 min. (DR) %  ≤ ±0.5
Minimum load  %Emax   0.5
Maximum safe overload  %Emax  150
Maximum safe sideload % 100
Ultimate load  %Emax 300
Stretching (Emax load)    
Maximum excitation voltage (Umax)  V  10
Rated output (Cn)  mV/V  2mV/V
Zero balance   %Cn  ≤ ±2.0
Input resistance Ω  385 ±20
Output resistance  Ω  351 ±3
Insulation resistance  ≥5000
Compensated temperature range  °C  -10...+40
Operating temperature range  °C  -40...+80
Load cells material    Stainless Steel
Sealing (EN 60529)    IP65
Cable length  m 5
Cable outer calibre mm 5
Weight kg  kg  1.3
Package dimensions / weight  cm/kg  14.5x23x6 - 1.5

...

Esit 444 Tel