PRODUCTS INDICATORS AND CONTROL DEVICES LOADCELL AMPLIFIERS LCA-X



LCA-X
Load Cell Amplifier

indicators and control devices, loadcell amplifiers ,lca x,indicator

Explanation;
LCA-X load cell amplifiers weigh various tanks and similar units, and enable remote monitoring of all measurements in the most cost-effective way possible.  

Weights of one or more units being weighed by the load cells can either be measured by the LCA-X devices in the measurement field and they can be monitored via a remote computer. The amplifier itself does not have a display.  

LCA-X distinguishes itself by enabling computerized setup of all parameters through the Modbus communication protocol. Remote access to and setup of parameters are made possible with the use of the embedded communication protocol, Modbus. This enables monitoring and programming of several LCAs, which are connected to the same communication bus, from a single control point such as a PC or a PLC.  

Two WindowsTM based software programs have been developed for communication with the LCA devices. The first one, Dlms_VP (Digital Load Cell Measurement System Virtual Panel) is capable of communicating with only one LCA device and setting up all parameters remotely. Dlms_NW (Digital Load Cell Measurement System Network), on the other hand, gives way to viewing more than one LCA amplifiers at the same time. With Dlms_NW, a multiple number of computers connected over a network can display the same data.  

The aluminum cast housing makes the device serviceable even under dusty, humid and corrosive conditions.

Features;

  • Dust and moisture resistant, aluminum cast housing
  • Zeroing within the entire measurement range
  • Gain adjustment for load cell output
  • Digital linearization Digital temperature compensation
  • Remote access to all internal parameters (Modbus)
  • Single LCA communication
  • PC program
  • RS232 / RS485 serial output



You can lug the list right and left <>

Specifications;

Accuracy 
Accuracy class (OIML approved) 7000d (III)
Input sensitivity 0.5 µV/dijit
Sensitivity %0.003
Zero and gain stability 3.6ppm/°C
A/D converter 24bit Sigma-Delta
Digital filter Adjustable numerical filtering
Reading frequency 50Hz
Loadcell 
Number of Loadcells allowed 8 (350ohm)
Analog input range ± 160mV/V
Excitation voltage 10V DC
Enviroment 
Operating temperature range (OIML approved) -10°C +40°C
Storage temperature range -20°C +70°C
Operating voltage and power 10-35V DC - 5W
Operator handling and Display 
Keyboard -
Weight display -
Function display -
Program Indicator -
Housing 
Material and protection class Aluminum, IP66
Weight 1kg
Package weight and dimensions 1.1kg, 15x24x6cm
Communication
Standard Optional
Serial communication output
RS232 / RS485 -
Parallel printer output
- -
Binary (BCD) output
- -
Remote display output
- -
Digital input / output
- 2 outputs (2A relay)
Analog output
- 4-20mA
*BCD and digital input/output options cannot be used at the same time.
Esit ürün sertifika listesi Documents
LCA-X Amplifier Technical Drawing (.pdf)


You can use the VariCad program to open 2D & 3D technical drawings.
Download the program
Esit ürün sertifika listesi Certificates
LCA CE LCA OIML R76 Comformity

...

Esit 444 Tel