HSC-V 200t Load Cell
200 t
load cells and mounting kits, compression type ,hsc-v 200t

The HSCV shear beam load cell has been developed for use in high capacity, compression type electronic weight and force  measurement applications in industrial environments. The precise and rugged HSCV load cell offers high resistance to side forces  and overload conditions.  

The HSCV load cells are suitable for severe industrial conditions and they find application in high capacity vehicle scales, railway  scales, tank weighing systems and process weighing applications. With its steel alloy construction coated with corrosion-retardant  paint as well as its strain gauge area welded with a stainless steel cover, HSCV is protected to IP68 standards meaning that they are  fully immersible.


  • Resistant to side forces
  • Heavy duty
  • Hermetic-sealed strain gauge area
  • Thin profile body
  • IP68 industrial protection


J Box Connection Box

You can lug the list right and left <>


Model Capacities Minumum Division Maximum Overload Capacity
HSCV 200 200000 kg 40 kg 300000 kg


Maximum capacities (Emax)  kg 200000
Accuracy (OIML R60)   C1
Maximum number of verification intervals ()   1000
Minimum verification interval ()  
Emax/3500 Emax/6750
Combined error  % K] ±0.05 ≤ ±0.02
Creep error over 30 min. (DR)  %Emax 0.0039
Minimum load  %Emax 0
Maximum safe overload  %Emax 150
Maximum safe sideload  %Emax 50
Ultimate load  %Emax 250
Stretching (Emax)  mm ≤ 0.3
Maximum excitation voltage (Umax)  V 15
Rated output (Cn)  mV/V 2 ±0.1%
Zero balance  %Cn ≤ ±1.0
Input Resistance  Ω 385±20
Output Resistance  Ω 350±3
Insulation resistance  MΩ ≥500
Compensated temperature range °C -10...+40
Operating temperature range  °C -40...+80
Load cell material   Steel
Sealing (EN60529)   IP68
Cable length  m 13
Cable diameter  mm 8
Weight  kg 37
Package dimensions / weight  cm/kg 45x45x20 / 40

Overload Control Systems

In machines that lift the weigh to air such as elevators and cranes overload check system is a must for security.Overload control systems consist of loadcells and control devices. Depending on the size and requirements of the system different load...

Force Standard/Calibration Machines

Force standard/calibration machine is used as a reference standard for the calibration of force measuring devices (force transducers, dynamometers, force sensors, load cell, proving rings and etc) both in tension and compression mode acc. to ISO 376 ...


Esit 444 Tel